- 479 C.I.D. “MERLIN LITE” ALUMINUM BLOCK
- 427 CRANK (3.67” STROKE)
- JE 8.5:1 PISTONS 4.500” BORE
- LUNATI CONNECTING RODS, +.250” LONG
- PRO-RACE 7” HARMONIC BALANCER
- B&M SUPERCHARGER WITH
8MM DRIVE
- EDELBROCK PERFORMER RPM-R ALUMINUM CYLINDER HEADS
- CUSTOM UPPER INTAKE MANIFOLD FABRICATED BY GRANT GOHEEN
- FUEL INJECTION SYSTEM CONTROLLED BY HOLLEY "COMMANDER 950"
- FOUR MIKUNI 40MM CARBURETORS USED AS THROTTLE BODIES
-
PETE JACKSON GEAR DRIVE
- CRANE .595/.615 LIFT 288/296 DURATION SOLID ROLLER CAMSHAFT
- CRANE ROLLER ROCKERS 1.8:1 INTAKE/1.7:1 EXHAUST
- +.100” LONG PUSH RODS
- 200 H.P. NITROUS OXIDE SYSTEM
- HOOKER SIDEMOUNT HEADERS
- EIGHT K&N LIFETIME AIR FILTERS
- MSD “BLASTER SS” COIL
- MSD BILLET DISTRIBUTOR, IGNITION AND REV LIMITER
- MOROSO "SUPERMAX 11" SPARK PLUG WIRES
- CUSTOM INTAKE COVER AND MATCHING ALUMINUM VALVE COVERS
- RUSSELL BRAIDED STAINLESS FUEL & WATER LINES
- HAMBURGER MAXIMUM OUTPUT MINI STARTER
- AEROMOTIVE ELECTRIC FUEL PUMP
- AEROMOTIVE PRE-PUMP FILTER AND K&N FINAL FUEL FILTER
- BE-COOL ALUMINUM RADIATOR
- SPAL DUAL ELECTRIC COOLING FANS
- FLEX-A-LITE TEMPERATURE CONTROL FOR FANS
- MILODON 8-QUART ROAD-RACE OIL PAN
- ROYAL PURPLE SYNTHETIC OIL
- ENGINE OIL COOLER WITH TEMPERATURE-CONTROLLED FAN
- RICHMOND "R.O.D." 6-SPEED TRANSMISSION W/LONG SHIFTER
- FIDANZA ALUMINUM FLYWHEEL
- CENTERFORCE DUAL FRICTION 11" CLUTCH & PRESSURE PLATE
- EATON H.D. POSITRACTION DIFFERENTIAL WITH 3.08:1 GEARS
|
- HAND-FORMED FRONT AND REAR FENDER FLARES
- REMOTE ELECTRIC DOOR LOCKS
- CUSTOM NOSE
- MOLDED ROCKER PANELS
- C4 CORVETTE SIDE MIRRORS MOLDED INTO DOORS
- REMOTE CONTROLLED "FLIP-DOWN" HEADLIGHTS IN GRILLE
- LEXAN AERODYNAMIC REAR WINDOW REPLACES STOCK UPRIGHT GLASS
- SEQUENTIAL LED TAILLIGHTS WITH CARBON FIBER SURROUNDS
- '69 CAMARO FUEL TANK MOUNTED UNDER FRAME
- GAS FILLER RELOCATED TO BEHIND LICENSE PLATE
- BUMPERS, EXTERIOR DOOR LOCKS, ALL EMBLEMS REMOVED
- ALL SEAMS FILLED
- L88 HOOD EXTENDED TO WINDSHIELD AND FINISHED ON UNDERSIDE
- CARBON FIBER WING WITH CUSTOM END PLATES
- DOORS, ROOF PANELS, HOOD OPENINGS FITTED TO 1/8" UNIFORM GAP
- LOWERED APPROXIMATELY 2-1/2"
- REMOVABLE FABRICATED CENTER CROSSMEMBER/TRANSMISSION MOUNT
- VETTE PRODUCTS DUAL MOUNT FIBERGLASS REAR SPRING
- VETTE PRODUCTS FIBERGLASS TRANSVERSE FRONT SPRING
- STAINLESS STEEL BRAKES “FORCE 10” ALUMINUM CALIPERS
- BRAIDED STAINLESS STEEL BRAKE LINES
- POWER STOP CROSS-DRILLED BRAKE ROTORS
- 5/8" WHEEL MOUNTING STUDS
- VETTE BRAKES TUBULAR STEEL FRONT CONTROL ARMS
- TOKICO SHOCK ABSORBERS
- 17" X 9" AND 17" X 11" BOYDS "SUPER STAR" BILLET WHEELS
- MICHELIN “PILOT SPORT” 275/40ZR-17 AND 335/35ZR-17 TIRES
- VETTE PRODUCTS ADJUSTABLE REAR STRUT RODS
- VETTE PRODUCTS 1-1/8" FRONT STABILIZER BAR
|
- ‘79 VETTE SEATS REDONE IN TOP GRADE LEATHER BY TOM ARGUE
- FAUX CARBON FIBER SEAT SHELLS BY HYDRO ILLUSIONS
- DOOR PANELS TRIMMED TO COMPLIMENT SEATS
- CYBERDYNE ULTRAGAUGE INSTRUMENTATION IN CUSTOM CENTER PANEL
- 5-POINT COMPETITION SEAT BELTS AND SHOULDER HARNESSES
- KENWOOD EXCELON STEREO RECEIVER, CD AND 200 WATT AMPLIFIER
- 4 ALPINE 6 X 9 SPEAKERS IN HANDFORMED HOUSINGS
- GRANT "CORSA" STEERING WHEEL
- GRANT RF CONTROLS FOR HEADLIGHT MOTOR, DOOR LOCKS, AND RADIO
- CHROME HALON FIRE EXTINGUISHER
- CARBON FIBER COMPARTMENT DOORS, SHIFT KNOB AND CONSOLE TRIM
|
