Richmond 6-Speed

As with the blower, the transmission was one of the very first 6-speeds released by Richmond. It necessitated removal of the factory welded center frame crossmember, and replacing it with a new, removable unit fabricated from 2" x 3" steel tubing. Shifter mounting was designed to place the shifter as low as possible in the console, and in stock location.

Show More

ALUMINUM BIG BLOCK, SUPERCHARGED AND FUEL INJECTED 

479 Merlin

The World Products' MERLIN LITE big block has been a vast improvement for NIGHTWIND. Nearly 200 Lbs lighter than the original cast iron, bored and stroked 427 c.i.d. engine, this all aluminum 479 c.i.d engine is mated to a lightweight Fidanza aluminum flywheel.

Fuel Injection

Changing from carburetors to fuel injection required installing a high pressure fuel system, mounting (8) 42 lb. injectors in the upper plenum, and adding sensors for intake charge temperature, throttle position and manifold absolute pressure. The carbs were converted to throttle bodies by gutting them and blocking off the fuel bowls with carbon fiber plates. A divider was added inside the plenum to enhance fuel dispersion. The system is programmed to operate in "speed-density" mode by a Holley "Commander 950" computer mounted behind the passenger-side of the dash.

 

Due to the age of the  electronics, I have to maintain an air-gapped laptop running a Windows XP operating system to tune it, since that's the latest computer language it understands. 

Show More

©2017 BY NIGHTWINDVETTE.COM

pic14