top of page

ENGINE/DRIVETRAIN

  • 479 C.I.D. WORLD PRODUCTS “MERLIN LITE” ALUMINUM BLOCK

  • 427 CRANK (3.76” STROKE)

  • JE 8.5:1 PISTONS 4.500” BORE

  • LUNATI CONNECTING RODS, +.250” LONG

  • PRO-RACE 7” HARMONIC BALANCER

  • B&M SUPERCHARGER WITH 8MM DRIVE

  • EDELBROCK PERFORMER RPM-R ALUMINUM CYLINDER HEADS

  • CUSTOM UPPER INTAKE MANIFOLD FABRICATED BY GRANT GOHEEN

  • FUEL INJECTION SYSTEM CONTROLLED BY HOLLEY "COMMANDER 950"

  • FOUR MIKUNI 40MM CARBURETORS CONVERTED TO THROTTLE BODIES

  • PETE JACKSON GEAR DRIVE

  • CRANE .595/.615 LIFT 288/296 DURATION SOLID ROLLER CAMSHAFT

  • CRANE ROLLER ROCKERS 1.8:1 INTAKE/1.7:1 EXHAUST

  • CRANE +.100” LONG PUSH RODS

  • HOOKER SIDEMOUNT HEADERS

  • EIGHT K&N LIFETIME AIR FILTERS

  • MSD “BLASTER SS” COIL

  • MSD BILLET DISTRIBUTOR, IGNITION AND REV LIMITER

  • MOROSO "SUPERMAX 11" SPARK PLUG WIRES

  • CUSTOM UPPER PLENUM COVER  

  • CAL CUSTOM POLISHED ALUMINUM VALVE COVERS

  • BRAIDED STAINLESS FUEL & WATER LINES

  • HAMBURGER MAXIMUM OUTPUT MINI STARTER

  • HOLLEY ELECTRIC FUEL PUMP

  • AEROMOTIVE PRE-PUMP FILTER

  • GRIFFIN ALUMINUM RADIATOR

  • EDELBROCK ALUMINUM WATER PUMP

  • COMPUTER CONTROLLED SPAL ELECTRIC COOLING FANS 

  • MILODON 6-QUART OIL PAN

  • MOBIL 1 FULL SYNTHETIC ENGINE OIL

  • ENGINE OIL COOLER AT LEFT FRONT ADJACENT TO CORE SUPPORT

  • RICHMOND "R.O.D." 6-SPEED MANUAL TRANSMISSION WITH LONG SHIFTER

  • FIDANZA ALUMINUM FLYWHEEL

  • HAYS 11" CLUTCH & PRESSURE PLATE

  • EATON KEVLAR PLATE POSITRACTION DIFFERENTIAL WITH 3.08:1 GEARS

BODY

  • HAND-FORMED FRONT AND REAR FENDER FLARES

  • REMOTE ELECTRIC DOOR LOCKS

  • CUSTOM NOSE WITH ACURA PARKING LIGHTS/TURN SIGNALS

  • MOLDED ROCKER PANELS

  • C4 CORVETTE SIDE MIRRORS MOLDED INTO DOORS

  • REMOTE CONTROLLED "FLIP-DOWN" HEADLIGHTS IN GRILLE

  • AERODYNAMIC REAR WINDOW REPLACES STOCK UPRIGHT GLASS

  • SEQUENTIAL LED TAILLIGHTS WITH CARBON FIBER SURROUNDS

  • '69 CAMARO FUEL TANK MOUNTED UNDER FRAME

  • GAS FILLER RELOCATED TO BEHIND LICENSE PLATE

  • BUMPERS, EXTERIOR DOOR LOCKS, ALL EMBLEMS REMOVED

  • ALL SEAMS FILLED

  • L88 HOOD EXTENDED TO WINDSHIELD AND FINISHED ON UNDERSIDE

  • CARBON FIBER WING WITH BODY-CONTOUR END PLATES

  • ONE-PIECE TRANSPARENT SMOKE-GREY ACRYLIC ROOF PANEL 

CHASSIS

  • LOWERED APPROXIMATELY 2-1/2"

  • REMOVABLE FABRICATED CENTER CROSSMEMBER/TRANSMISSION MOUNT

  • VETTE PRODUCTS DUAL MOUNT COMPOSITE REAR SPRING

  • VETTE PRODUCTS COMPOSITE TRANSVERSE FRONT SPRING

  • STAINLESS STEEL BRAKES “FORCE 10” ALUMINUM CALIPERS

  • BRAIDED STAINLESS STEEL BRAKE LINES

  • POWER STOP CROSS-DRILLED BRAKE ROTORS

  • 5/8" WHEEL MOUNTING STUDS

  • VETTE BRAKES TUBULAR STEEL FRONT CONTROL ARMS

  • TOKICO SHOCK ABSORBERS

  • 17" X 9" AND 17" X 11" BOYDS "SUPER STAR" 3-PIECE BILLET WHEELS

  • 275/40ZR-17 FRONT AND 335/35ZR-17 REAR TIRES

  • VETTE PRODUCTS ADJUSTABLE REAR STRUT RODS

  • VETTE PRODUCTS 1-1/8" FRONT STABILIZER BAR

  • REAR STABILIZER BAR REMOVED

INTERIOR

  • ‘79-'82 STYLE VETTE SEATS 

  • FAUX CARBON FIBER SEAT SHELLS BY HYDRO ILLUSIONS

  • DOOR PANELS TRIMMED TO COMPLIMENT SEATS

  • CYBERDYNE ULTRAGAUGE INSTRUMENTATION IN CUSTOM CENTER PANEL

  • 5-POINT COMPETITION SEAT BELTS AND SHOULDER HARNESSES

  • KENWOOD EXCELON STEREO RECEIVER, CD AND 200 WATT AMPLIFIER

  • 4 ALPINE 6 X 9 SPEAKERS IN HANDFORMED HOUSINGS

  • GRANT "CORSA" STEERING WHEEL WITH CUSTOM RED ACCENTS

  • GRANT RF CONTROLS FOR HEADLIGHT MOTOR, DOOR LOCKS AND RADIO

  • CHROME HALON FIRE EXTINGUISHER

  • CARBON FIBER COMPARTMENT DOORS AND CONSOLE TRIM

MISCELLANEOUS

  • BORGESON INTEGRATED POWER STEERING BOX

  • FACTORY ORIGINAL A/C COMPRESSOR!

  • CUSTOM A/C CONDENSER MOUNTED AT REAR ABOVE FUEL TANK

  • ELECTRIC FAN ON CONDENSER ACTIVATES WITH COMPRESSOR

600460.jpg
bottom of page